rotator Powder Coating Monday, February 27, 2017
Skip Navigation LinksHome) Webinar 2013-5/21 What to Look for in Your Combina
Powder Coating is the only technical publication devoted to the Powder Coating industry and other green finishing technologies.

What to Look for in Your Combination Convection/Infrared Oven:
Design and Energy Considerations

Tuesday, May 21, 2013

Time:  12:00 PM (Noon) – 2:00 PM EDT

Presented by:  Sherrill Stoenner

Moderated by:  Alicia Tyznik, Editor of Powder Coating

Webinar Cost:  $99.00 USD

Registration fee is non-refundable after the live event.

Webinar Details:  In this webinar, we will discuss how infrared (IR) emitters can be installed into a convection oven. We’ll discuss the results that will be achieved in production flexibility and cost savings to operate a combination convection/IR cure oven. This includes the net energy cost to run a combination oven versus a convection-only oven, and the energy savings of running a combination oven compared with a convection-only oven. This will lead into a discussion of how combining convection and IR technology can be made into a just-in-time (JIT) oven operation to handle a variety of parts with different material thicknesses, which allows you to get away from batching parts of like material thickness to properly cure parts.

The webinar will end with a look at several case studies of companies successfully using combination ovens in their finishing operations. You’ll find out what impact these ovens had on the companies’ production and how much energy they saved.

Presenter Information:  Sherrill Stoenner is president of Stoenner Finishing Consultants LLC. He is president of the Central States Chapter of the Chemical Coaters Association International (CCAI) and has been elected to CCAI’s national board of directors, serving as president. An engineer, he is a prolific author and lecturer with more than 40 years of experience in plant and manufacturing engineering. He has worked for Milbank Systems, LPS Technology, SBS Industrial Systems Group Design, and Pneu-Mech Systems Manufacturing. He is also very active in the Powder Coating Institute’s subcommittees and is a past member of the AFP/SME National Board of Advisors.

PDH Information:  If you are working on a certification or licensing program that allows Professional Development Hours, CSC Publishing Inc. will (upon request) provide a Certificate of Participation for our educational webinars put on by Powder Coating. One certificate per registered participant will be sent if the webinar is viewed. You should check with your employer or local agency to confirm their specific PDH requirements. In many cases, our educational webinars will contribute toward these hours.

      Copyright 2017, CSC Publishing Inc. ALL Rights Reserved * Privacy policy