rotator Powder Coating Monday, September 01, 2014
Skip Navigation LinksHome) Webinar 2013-4/2 What to Look for in Your Infrared
Powder Coating is the only technical publication devoted to the Powder Coating industry and other green finishing technologies.
 

What to Look for in Your Infrared Oven:
Design and Energy Considerations


Date:  
Tuesday, April 2, 2013

Time:  12:00 PM (Noon) – 2:00 PM EDT

Presented by:  Sherrill Stoenner

Moderated by:  Peggy Koop, Editor of Powder Coating

Webinar Cost:  $99.00 USD

Registration fee is non-refundable after the live event.



Webinar Details:  This webinar will start with a general discussion of the different types of electric and gas-fired infrared (IR) emitters available for curing powder coatings. We will cover how each type of emitter is produced and how each type of emitter’s service life and repairability provides you, the end user, with a reliable system. From there, we will discuss which applications are best-suited for each emitter type.

The webinar will also cover how efficient each emitter type is at producing IR energy and how each type transfers that energy into the part being heated. The presentation will end with a discussion of an IR-only cure oven, pointing out some pros and cons of this curing method.

Presenter Information:  Sherrill Stoenner is president of Stoenner Finishing Consultants LLC. He is president of the Central States Chapter of the Chemical Coaters Association International (CCAI) and has been elected to CCAI’s national board of directors, serving as president. An engineer, he is a prolific author and lecturer with more than 40 years of experience in plant and manufacturing engineering. He has worked for Milbank Systems, LPS Technology, SBS Industrial Systems Group Design, and Pneu-Mech Systems Manufacturing. He is also very active in the Powder Coating Institute’s subcommittees and is a past member of the AFP/SME National Board of Advisors.

PDH Information:  If you are working on a certification or licensing program that allows Professional Development Hours, CSC Publishing Inc. will (upon request) provide a Certificate of Participation for our educational webinars put on by Powder Coating. One certificate per registered participant will be sent if the webinar is viewed. You should check with your employer or local agency to confirm their specific PDH requirements. In many cases, our educational webinars will contribute toward these hours.


      Copyright 2014, CSC Publishing Inc. ALL Rights Reserved * Privacy policy