rotator Powder Coating Saturday, October 25, 2014
Skip Navigation LinksHome) Webinar 2012-10/23 Washer Design and Energy Effici
Powder Coating is the only technical publication devoted to the Powder Coating industry and other green finishing technologies.
 

How to Buy a Washer: Design and Energy Considerations


Date:  
Tuesday, October 23, 2012

Time:  12:00 PM (Noon) – 2:00 PM EDT

Presented by:  Sherrill Stoenner

Moderated by:  Peggy Koop, Editor of Powder Coating

Webinar Cost:  $99.00 USD

Registration fee is non-refundable after the live event.



Webinar Details:  This webinar will start out with a discussion of why we have washers with different numbers of stages and how some of the new technology is changing how we configure these. It will then go into the process of sizing the pumps and burners used in the washer with some dos and don’ts. It will cover the general requirements for the fabrication of a washer and how various elements can have an effect on the energy efficiency of the washer. It will also include an in-depth discussion on when to use burner tubes versus heat exchangers and boilers to heat the washer stages.

The webinar will end with a discussion of various energy-saving ideas. We’ll discuss whether they make sense and if they will pay for themselves.

Presenter Information:  Sherrill Stoenner is president of Stoenner Finishing Consultants LLC. He is president of the Central States Chapter of the Chemical Coaters Association International (CCAI) and has been elected to CCAI’s national board of directors, serving as president. An engineer, he is a prolific author and lecturer with more than 40 years of experience in plant and manufacturing engineering. He has worked for Milbank Systems, LPS Technology, SBS Industrial Systems Group Design, and Pneu-Mech Systems Manufacturing. He is also very active in the Powder Coating Institute’s subcommittees and is a past member of the AFP/SME National Board of Advisors.

PDH Information:  If you are working on a certification or licensing program that allows Professional Development Hours, CSC Publishing Inc. will (upon request) provide a Certificate of Participation for our educational webinars put on by Powder Coating. One certificate per registered participant will be sent if the webinar is viewed. You should check with your employer or local agency to confirm their specific PDH requirements. In many cases, our educational webinars will contribute toward these hours.


      Copyright 2014, CSC Publishing Inc. ALL Rights Reserved * Privacy policy