What to Look for in Your Infrared Oven: Design and Energy Considerations, 4/13
CD of live broadcast 4/2/2013
This webinar will start with a general discussion of the different types of electric and gas-fired infrared (IR) emitters available for curing powder coatings. We will cover how each type of emitter is produced and how each type of emitter’s service life and reparability provides you, the end user, with a reliable system. From there, we will discuss which applications are best-suited for each emitter type.
The webinar will also cover how efficient each emitter type is at producing IR energy and how each type transfers that energy into the part being heated. The presentation will end with a discussion of an IR-only cure oven, pointing out some pros and cons of this curing method.
Presenter: Sherrill Stoenner is president of Stoenner Finishing Consultants LLC. He is president of the Central States Chapter of the Chemical Coaters Association International (CCAI) and has been elected to CCAI’s national board of directors, serving as president. An engineer, he is a prolific author and lecturer with more than 40 years of experience in plant and manufacturing engineering. He has worked for Milbank Systems, LPS Technology, SBS Industrial Systems Group Design, and Pneu-Mech Systems Manufacturing. He is also very active in the Powder Coating Institute’s subcommittees and is a past member of the AFP/SME National Board of Advisors.
Moderator: Alicia Tyznik, Editor of Powder Coating
CDs are non-returnable/non-refundable