rotator Powder Coating Wednesday, May 25, 2016
Skip Navigation LinksHome) Item Details
Powder Coating is a technical information publication devoted to the Powder Coating Industry.
Technical Articles
Item Details:
Publication Date: 06/2006
Pages: 3
PDF Format
Recommended Item:
UV-curable powder: The door to opportunity

Actual production experiences are usually the best way to learn about how well a material will work on a part. This article is just that: an actual experience by a powder coater on how suitable an ultraviolet-curable (UV-curable) powder coating was for a specific part made of medium-density fiberboard (MDF). The article describes the part, the coating challenges involved, and the solutions provided by a specific powder coating.

The challenge was to put a superior powder coat finish onto MDF surfaces that were 1/4-inch thick and 1 5/16 inches thick. The heat-sensitive issue loomed large for the traditional MDF thermoset powders. Yes, you could lower the oven temperatures for the 1/4-inch MDF; and yes, you could raise the oven temperatures for the 1 5/16-inch MDF. However, when the various thicknesses were in the same assembly, powder application became a much bigger challenge.

To read this entire article:

You may purchase this article now for personal use. Simply click the Buy Item button above, enter your payment details, and download the article. It will be available to you for 7 days for viewing, printing, or saving for future reference. All articles are copyrighted by CSC Publishing, Inc. and cannot be used for commercial purposes without express permission in writing from the Publisher. This includes but is not limited to: web posting, printing, or sharing via email.


Your payment information is forwarded in an encrypted form, using 40- or 128-bit Secure Socket Layer technology, only to our payment gateway ( for processing.


To view an article, you must have Acrobat Reader installed on your computer. Click on the icon to download Acrobat Reader free of charge.

Copyright 2008, CSC Publishing Inc. ALL Rights Reserved